Zhongshan Warehouse Retrofit: Fitting a Conveyor into an Older Building
The warehouse was built in 2003, with a 5.2-metre ceiling, uneven floor and a working operation that could not stop. The conveyor…
4 min read
Topic hub
Conveyors
Every Kailida article filed under Conveyors — selection notes, commissioning detail and field experience from our project engineers.
VFD Settings for Conveyors: Key Parameters and Order of Work
A VFD with factory settings will run a conveyor, but it will not run it well. The acceleration, the overload and the stop mode…
4 min read
Conveyor Noise: Six Sources and How to Isolate Them
A noisy conveyor is not just an annoyance. Noise is energy leaving the system, and it usually points to wear, misalignment or a…
3 min read
ESD Grounding on Conveyor Lines: What Actually Works
Grounding a conveyor is not a single wire. It is a path from the product to the carrier, the frame and the building earth — and…
4 min read
Packaging Line to Palletizer: Conveyor Interface Design
The last ten metres of a packaging line decide the pallet quality. Carton orientation, gap, accumulation and transfer height all…
4 min read
Commissioning Sequence: Six Steps from No-Load to Full Load
Commissioning is not a single switch-on. It is a sequence that proves the mechanical, electrical and control systems in the right…
4 min read
Cleanroom Conveying in Pharmaceutical Packaging
A cleanroom conveyor has to do the same job as any other conveyor while meeting cleaning, particle and documentation requirements…
3 min read
Conveyor Installation: Leveling, Anchoring and Frame Fixing
Most conveyor installation problems are created in the first two hours. A frame that is not level or not anchored will produce…
3 min read
E-commerce Sorting and Conveyor Integration
A sorting system is only as good as its induction. If the parcel arrives at the sorter at the wrong speed, orientation or gap, the…
4 min read